Pages

Tuesday, November 27, 2012

Error in OSHA Combustible Dust; Advance Notice of Proposed Rulemaking

Reviewing the OSHA advance notice of proposed rulemaking (ANPR) creates quite a concern. For example in the second sentence of the "Summary" at the top of the page, "For the purposes of this notice, the term "combustible dust" includes all combustible particulate solids of any size, shape, or chemical composition that could present a fire or deflagration hazard when suspended in air or other oxidizing medium"

So for combustible dust to be hazard it must be suspended in air? What about smoldering layers of dust which also fire and explosion hazards? Before dust can be in suspension it first must be layered on horizontal surfaces. Personnel have been fatally and severely injured from smoldering dust initially not in suspension. Additionally facilities have burned to the ground due to layers of dust.

The problem of OSHA defining combustible dust solely in suspension became readily apparent when trade associations submitted comments in response to the ANPRM requesting their NAICS be removed from "Table 1--Industries Having at Least One Recorded Combustible Dust Incident Reported Since 1980," since combustible dust incidents at facilities they represented were dust layered fires and not in suspension. Was the Dust Incident table (page 43 .pdf) listing severity of consequences (Kst's) instead of NAICS, during a topic of discussion at the 2011 OSHA Combustible Dust Expert Forum a response to the turmoil of defining combustible dust solely in suspension?

There is no mention whatsoever in the OSHA Combustible Dust ANPRM about catastrophic combustible dust related fires as a result of layered dust not in suspension. In stark and awakening contrast, the NFPA Fire Analysis and Research Division prepared a report, "Fires in U.S. Industrial and Manufacturing Facilities" providing  insightful information regarding combustible dust related structure fires in manufacturing properties from 2006-2010. The NFPA report noted that shop tools and industrial equipment were involved in 29% of these structure fires. 


Most importantly dust, fiber, or lint (including sawdust) was the item first ignited in 12% of manufacturing facility incidents. This would equate to over 600 combustible dust related incidents annually. A vast and disturbingly revealing  difference from the 2006 CSB Dust Hazard Investigation Report identifying 281 combustible dust incidents from 1980-2005, or approximately 11 incidents annually. The educational NFPA report obtained fire incident data from the US Fire Administration's National Fire Incident Reporting System (NFIRS) data in conjunction with NFPA’s annual survey of U.S. fire departments. 

Its quite alarming where our global trading partners in the IECEx Scheme and European ATEX System recognize dust layers as a fire and explosion hazard yet here in the USA we do not recognize these immediate hazards in the current combustible dust rulemaking process. Continuing to proceed in solely defining combustible dust as a hazard in suspension and ignoring dust layers will have serious consequences in the future as experienced now and in the past. Is it time for a revision of the OSHA Combustible Dust; Advance Notice of Proposed Rulemaking in accordance with reality or should we continue while in error? 

On a side note, do you know the burning behavior of your dust? Additional information on burning behavior (VDI 2263). Currently OSHA nor CSB recognizes burning behavior in evaluating combustible dust fire and explosion workplace hazards.Unfortunately, we'll have to wait for another catastrophe before burning behavior is reconized like it is amongst our international trading partners.


No comments:

 

Questions, Problems, Feedback? Please send email by clicking this link...Thanks

©Copyright 2008-2012. Combustible Dust Policy Institute
The information in http://dustexplosions.blogspot.com/ is not meant to be a substitute for the Code of Federal Regulations (CFR), Federal Register, and other OSHA documents, which should serve as the primary source of regulatory guidance. The information on this site should not be used in place of appropriate technical or legal advice related to your company's specific circumstances. Combustible Dust Policy Institute tries to provide quality information, but we make no claims, promises or guarantees about the accuracy, completeness, or adequacy of the information contained in or linked to this web site and its associated sites. Combustible Dust Policy Institute has no liability arising from or relating to the use, interpretation, or application of the information or its accuracy or inaccuracy. Copyright notice: All materials in this site are copyrighted by the Combustible Dust Policy Institute. No materials may be directly or indirectly published, posted to Internet and intranet distribution channels, broadcast, rewritten for broadcast or publication or redistributed in any medium without permission.